RCModelScout.

HobbyKing

F-TEK 31AP FLIGHT STABILIZATION CONTROLLER & F-TEK OSD COMBO

Features:, • Level flight - When stabilization is activated, the F-TEK 31AP will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft  flying, this is advantageous as it makes flight easier and increases the student pilot's self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., F-TEK 31AP Specs:, F-TEK OSD Specs:, Package Includes:, F-TEK 31AP Flight Controller,

HobbyKing

F-TEK 30A FIXED WING FLIGHT STABILIZATION CONTROLLER (W/SELF-LEVELING)

The F-TEK 30A offers three flight modes which can be remotely selected from an auxiliary transmitter channel in flight (3 position switch required to operate all 3 modes):, Auto-Stabilization Mode:, In this mode the F-TEK 30A will utilize the 3-axis accelerometer to self-level the aircraft when the flight sticks are at their neutral position. This is great for new pilot training and for aerial video/FPV platforms!, Standard Mode/3D Control Mode:, In this mode the device will utilize the 3-axis gyroscope to sense roll velocity and flight attitude. It will not self-level and will allow for more maneuverability for sport/3D flying., Deactivated Mode:, In this mode the device will not provide any stabilization and the model will fly as if there is no stabilization device connected., Specs:, Stabilization:, 3-axis gyro and 3-axis accelerometer, Flight Mode:, 3 selectable by transmitter, Includes:, F-TEK 30A Flight Controller,

HobbyKing

DHC-2 BEAVER EP/GP .46 SIZE (KENMORE AIR) 1620MM (ARF)

The DH Beaver is without doubt one of the most widely know STOL "bush planes" and has become an aviation classic, good looking, powerful, tough and very capable, the Beaver was ideally suited to operating in the most hostile of conditions. As it could also be fitted with floats or skis, the Beaver became a hugely popular workhorse with both Civilian and Military Operators, despite a slow start, the Beaver became a huge sales success and ranks as one of Canada's most successful exports.This Beaver is modeled in the "Kenmore Air" scheme and has a superb, high detail scale finish. The airframe is nicely constructed and the covering expertly applied. This model features printed rivets and panel lines on the covering providing an ultra-realistic finish. This gives you a truly fantastic looking scale model that any pilot would be proud to own. With a 1620mm wingspan, the Beaver is a great size and has tons of presence both on the ground and in the air.This model can be finished in both electric or glow configuration. The windshield doubles as a removable magnetic battery hatch allowing for easy access to the inside of the model - perfect for accessing your flight battery when used in an electric configuration.The Beaver of course was famous for its superb STOL characteristics and this model is no exception. Landings are a breeze thanks to the large wing area and stable slow-flight characteristics. This fantastic looking DH Beaver is such a pleasure to fly and is very practical, the perfect every day model for even the most demanding RC scale pilots!Features:• High Level of Scale Detail • Beautifully Printed Scale Rivets and Panel Lines• Functional Cockpit Door• Nicely Finished Glass Fiber Cowl • Tough Under-Carriage and Steerable TailwheelSpecs: Wingspan: 1620mmLength: 1115mmFlying Weight: 2700~2800gIncludes:All HardwareInstrucionsRequires:Your Own 5~6 Channel TX/RX.46 Equivelent Brushless Outrunner Motor60A ESC w/BEC4~5 x Standard Size Servo3300~4000mAh 4s Lipoly Battery11x6~12x6 Propeller,

HobbyKing

POWERBOX GEMINI II VOLTAGE REGULATOR W/SENSORSWITCH

The Gemini II is the logical development of the PowerBox Gemini, which has been unchanged since 2005. The revised design incorporates ideas gleaned from customer requests and continued testing. The Gemini II is considerably higher performance than the earlier model, since the case now consists of a high-quality machined aluminium heat-sink. Numerous supplementary features have also been added. For example, the pilot now has two options for activating the system: either by push-button using the SensorSwitch, or using a magnet. This also allows the implementation of a concealed installation. When using the magnet option a integral buzzer indicates the ON and OFF state., Like all power supply systems from PowerBox Systems, the Gemini II boasts consistent redundant construction: two regulators, two controllers and two integral Hall sensors ensure a totally reliable power supply. The external SensorSwitch activates both electronic switches simultaneously. The tri-colour LEDs in the SensorSwitch indicate the battery status in four stages. The battery inputs take the form of MPX high-current connectors. The output voltage is double-regulated, and can be set either to 5.9 V or 7.4 V., Operating Voltage:, Power Supply:, Current Drain:, Voltage Drop:, Output Voltage:, Max. Continuous Current:, Temperature Range:, Dimensions:, Weight:, SensorSwitch:,

HobbyKing

FATSHARK PILOTHD 720P 30FPS HD FPV CAMERA

Imager:, Resolution:, Format:, Memory Card Support:, Power:, Power Consumption:, Output:, Lens:, Lens Dimensions:, Case Dimensions:, Weight:, Pilot HD 720p Camera,

HobbyKing

SUPERLIGHT EDGE 540EP 3D KIT

Motor:, 35xx to 42xx Series Brushless Outrunner (Required), Battery:, 3000mAh 3S~4s (Required),

HobbyKing

TURNIGY NANO-TECH 4000MAH 10S 45~90C LIPO PACK

: 4000mAh, : 10S1P / 10 Cell / 37V, : 45C Constant / 90C Burst, : 1169g (including wire, plug & case), : 305x54x36mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:, MIKADO LOGO600/600SE, MA Furion 6,

HobbyKing

TURNIGY NANO-TECH 4000MAH 5S 25~50C LIPO PACK

: 4000mAh, : 5S1P / 5 Cell / 18.5V, : 25C Constant / 50C Burst, : 525g (including wire, plug & case), : 161x49x33mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:,

HobbyKing

TURNIGY NANO-TECH 4500MAH 10S 25~50C LIPO PACK

: 4500mAh, : 10S1P / 10 Cell / 37V, : 25C Constant / 50C Burst, : 1157g (including wire, plug & case), : 305x53x36mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:, MIKADO LOGO600/600SE, MA Furion 6, MA Furion 6, Joker 3,

HobbyKing

TURNIGY NANO-TECH 2650MAH 4S 25~50C LIPO PACK

: 2650mAh, : 4S1P / 4 Cell / 14.8V, : 25C Constant / 50C Burst, : 275g (including wire, plug & case), : 145x44x22mm, : JST-XH, Discharge Plug:, 4mm Bullet-connector,

HobbyKing

TURNIGY NANO-TECH 2650MAH 4S 35~70C LIPO PACK

: 2650mAh, : 4S1P / 4 Cell / 14.8V, : 35C Constant / 70C Burst, : 291g (including wire, plug & case), : 145x45x22mm, : JST-XH, Discharge Plug:, 4mm bullet-connector,

HobbyKing

TURNIGY 9X 9CH TRANSMITTER W/ MODULE & 8CH RECEIVER (MODE 2) (V2 FIRMWARE)

Support user:8, Stick model:4, Required:, Battery, Included:, Turnigy 9x 9Ch Transmitter, NOTE: "SWITCH ERROR" means you have one of the switches in the wrong position when you turn the radio on. It is not a fault.,

HobbyKing

515MM MS COMPOSIT NEXUS 30 3D NIGHT BLADE

HobbyKing

TURNIGY NANO-TECH 5000MAH 5S 25~50C LIPO PACK

: 5000mAh, : 5S1P / 5 Cell / 18.5V, : 25C Constant / 50C Burst, : 643g (including wire, plug & case), : 160x50x41mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:,

HobbyKing

600MM MS COMPOSIT 3D NIGHT MAIN BLADES